Bachmann DCC and
NCE decoders.
Bachmann has released a entry
level DCC system to the market, to simplify the programming
developed a procedure not currently used by other manufacturers. For
reasons not clear it would appear that Bachmann committed to
manufacture before realizing this.
According to Jim at NCE this means that when attempting to program a engine equipped with
a NMRA comparable decoder such as the NCE all locomotives on the
system will respond to that broadcast.
The simplest solution is to
remove ALL
locomotive [s] not begin programmed by the system from the track,
program that one locomotive. All locomotive [s] can now be placed
back on the track, the problem is in the method not the addressing.
All NCE decoder support
baseline programming.